Windows XP Home Edition or Professional can be installed in a virtual machine using the corresponding Windows XP distribution CD. If you wish to use sound in the virtual machine, be sure to read Using Sound in a Windows XP Guest Operating System below.
Note: Some Microsoft Windows XP OEM disks included with new computers are customized for those computers and include device drivers and other utilities specific to the hardware system. Even if you can install this Windows XP operating system on your actual computer, you may not be able to install it in a VMware ESX Server virtual machine. You may need to purchase a new copy of Windows to install in a virtual machine.
Note: To use SCSI disks in a Windows XP virtual machine, you need a special SCSI driver available from the download section of the VMware Web site at http://www.vmware.com/download. Follow the instructions on the Web site to use the driver with a fresh installation of Windows XP. If you have a virtual machine with a SCSI virtual disk and a Windows 9x, Windows Me, Windows NT or Windows 2000 guest operating system and want to upgrade it to Windows XP, install the new SCSI driver before upgrading the operating system.
To install Windows XP into a virtual machine:
Note: If you want to run Windows XP Home Edition or Professional in a VMware ESX Server virtual machine, be sure you have a full installation CD for the operating system.
Before installing the operating system, be sure that you have already created a new virtual machine and configured it using the Virtual Machine Wizard.
Follow these steps to install Windows XP into a virtual machine:
- Use the Configuration Editor to verify the virtual machine's devices are set up as you expect before starting the installation. For example, if you would like networking software to be installed during the Windows XP installation, be sure the virtual machine's Ethernet adapter is configured and enabled. VMware also recommends that you disable the screen saver on the host system before starting the installation process.
- Insert the installation CD in the CD-ROM drive on your VMware ESX Server host.
- Power on the virtual machine to start installing the guest operating system.
- Follow the installation steps as you would for a physical machine, except as noted in the following steps.
- After the system reboots, a message box asks if you want Windows to automatically correct your screen resolution and color depth setting. Do not make the change at this time. You cannot change resolution and color depth until you have installed the VMware SVGA driver - part of the VMware Tools package.
- Run the VMware Tools installer. For details, see Using VMware Tools.
- When the guest operating system reboots, allow it to change the screen resolution and color depth setting.
Using Sound in a Windows XP Guest Operating System
The VMware ESX Server sound device is disabled by default and must be enabled with the Configuration Editor (Settings > Configuration Editor) after the operating system has been installed.
Note: Your sound card must be working in your host operating system in order to use sound in the virtual machine.
In addition, Windows XP does not automatically detect and install drivers for ISA sound cards, such as the Creative Sound Blaster emulated in a virtual machine. Follow these steps to configure sound in a Windows XP guest operating system.
Known Issues
The Microsoft Windows XP product activation feature creates a numerical key based on the virtual hardware in the virtual machine where it is installed. Changes in the configuration of the virtual machine may require you to reactivate the operating system. There are some steps you can take to minimize the number of significant changes.
- Set the final memory size for your virtual machine before you activate
Windows XP. When you cross certain thresholds — approximately 32MB, 64MB,
128MB, 256MB, 512MB and 1GB — the product activation feature sees the changes
as significant.
Note: The size reported to the Windows product activation feature is slightly less than the actual amount configured for the virtual machine. For example, 128MB is interpreted as falling in the 64MB–127MB range. - Install VMware Tools before you activate Windows XP. When the SVGA driver in the VMware Tools package is installed, it activates features in the virtual graphics adapter that make it appear to Windows XP as a new graphics adapter.
- If you want to experiment with any other aspects of the virtual machine configuration, do so before activating Windows XP. Keep in mind that you have 30 days for experimentation before you have to activate the operating system.
For more details on Windows XP product activation, see the Microsoft Web site.
On a Linux host with an XFree86 3.x X server, it is best not to run a screen saver in the guest operating system. Guest screen savers that demand a lot of processing power can cause the X server on the host to freeze.
The hibernation feature is not supported in this release. Instead of using the guest operating system’s hibernate feature, suspend the virtual machine by clicking Suspend on the VMware ESX Server toolbar.
© 2001-2002 VMware, Inc. All rights reserved.
Install or Copy the following
1. Install Windows XP with Windows Internals 4th ebook
2. Install Windows XP Embedded
3. Install Windows XP/2003 Source (due to incomplete contract it's on the internet archive, but complete source).
4. Install the Windows 2003 DDK and SDK
5. Install Visual Studio 2003 Academic
6. Install Visual Studio 2005 Professional
7. Install Office XP Professional
8. Install the Windows Research Kernel Source. With Curriculum Toolkit (from 2009 UVa Wise Sysdmin)
9. Install the Shared Source Common Language Infustructure v 2.0 with ebook (from Shared Source contract 2006)
10. Install SCO OpenServer 5 Source
11. Install MinWin (from Beta Archive)
12. Install Windows Services for UNIX v 3.0
13. Install the MSDN Magazine Archive CDROM.
14. Make a Longhorn Virtual Machine from the PDC 2003 Discs and remove the time bomb and crack the activation then mount it in the Windows XP VM.